home *** CD-ROM | disk | FTP | other *** search
/ Collection of Tools & Utilities / Collection of Tools and Utilities.iso / edit / vised35.zip / README.DOC < prev    next >
Text File  |  1993-04-05  |  12KB  |  270 lines

  1. File Name: README.DOC
  2. ---------------------
  3.  
  4. This file contains important information regarding Vision Edit version 3.5.
  5. Please read it carefully.
  6.  
  7.     The complete VISION EDIT evaluation package should contain the
  8.     following files.  Please ensure that each file is present.  If
  9.     any of these files are missing then the package is not complete
  10.     and is not suitable for distribution to others.  The complete
  11.     package may be obtained directly from ANDRZEJ BRZEZINSKI &
  12.     MAREK KOSZNIK in a sealed envelope.
  13.  
  14. -----------------------------------------------------------------------------
  15. Vision Edit comes with the following files:
  16.  
  17. - README.DOC: this file;
  18. - REGISTER.DOC: registration instructions;
  19. - DESCRIBE.DOC: Sample descriptions for catalogs, BBSs, etc.
  20. - VENDOR.DOC: Information and restrictions for disk vendors, distributors, 
  21.               user groups, and more.
  22. - SYSOP.DOC: Information for Bulletin Board System distribution.
  23. - FORM1.DOC: registration form for a single-computer registration;
  24. - FORM2.DOC: registration form for a multiple-computer and network
  25.              registration;
  26. - FORM3.DOC: registration form for educational package (only for educational
  27.              institutions);
  28. - MANUAL.DOC: a text file containing the manual;
  29. - LICENSE.DOC: discription of Shareware concept, Warranty;
  30. - SITELICE.DOC: Site License Information and Agreement.
  31. - VED.EXE: program file;
  32. - VED.HLP: help file;
  33. - VED.OVR: program file (overlayed code);
  34. - VED.DSK: VED desktop file;
  35. - VED.OPT: VED options file;
  36. - DEMO.MAC,DEMO1.MAC,...,DEMO6.MAC: demos of macro capabilities;
  37. - COMMANDS.DOC: a list of all Vision Edit commands (useful when redefining
  38.   commands);
  39. - VEDNEWS.DOC: a list of new features;
  40. - VED.PAL: default color palette, NEW.PAL: alternative color palette,
  41.   MONOCHRO.PAL: monochrome color palette;
  42. - ERGO.DRV, SPEEDST.DRV, TRIDENT.DRV: VGA drivers for selecting other text
  43.   modes (e.g. 132 columns) ( procedure which describes modes creation later 
  44.                              in this file) ;                   
  45. - MAKEDRV.EXE and TESTMODE.EXE utilities for installing your VGA driver
  46.   (see below for VGA Installation Procedure);
  47. - RTM.EXE and DPMI16BI.OVL Borland's DPMI run-time manager (only in
  48.   registered version);
  49. - MSOMNI.EXE and VED_OMNI.BAT - a utility that should only be used by
  50.   the users who have a Nothgate Omnikey keyboard (fixes problems with some
  51.   special keys e.g. arrow keys).
  52.  
  53. IMPORTANT NOTES:
  54. ================
  55. 1)
  56. We no longer distribute the ShareSpell spelling checker with Vision Edit in
  57. order to keep the size of our distribution file to minimum. You can find
  58. ShareSpell or another spelling checker in most BBSes and shareware archives.
  59.  
  60. 2)
  61. New features introduced in version 3.5 are described in a separate file
  62. VEDNEWS.DOC.
  63.  
  64. 3)
  65. If you used any of the older versions of Vision Edit (< 3.5), make sure you 
  66. have removed ved.opt, all ved.dsk, and all *.cmd files. The new options and 
  67. desktop files are not compatible with the old ones. If you do not remove the 
  68. old ved.opt and ved.dsk warning messages will be displayed: "Error reading 
  69. Options file." and "Error reading Desktop file.".
  70.  
  71. 4)
  72. We recommend that you add Vision Edit directory to the PATH statement in your
  73. AUTOEXEC.BAT file e.g.:
  74. PATH=C:\DOS;C:\VED;
  75.  
  76. 5)
  77. For a better performance we recommend that you install expanded memory and
  78. a disk cache software if possible.
  79.  
  80. 6)
  81. Beginning with version 3.5 we introduce educational package which may be
  82. ordered by educational institutions only (e.g. Universities). For details see 
  83. REGISTER.DOC.
  84.  
  85. 7) Only for owners of Northgate Omnikey keyboard 
  86. The owners of a Northgate Omnikey keyboard may experience problems with
  87. some special keys e.g. arrow keys. We include MSOMNI.EXE utility that fixes
  88. that problem. If you want do use it start Vision Edit as VED_OMNI 
  89. (there is a batch file VED_OMNI.BAT) instead of VED.
  90.  
  91.  
  92. VGA Installation Procedure
  93. ==========================
  94. If you have a VGA graphics card that supports other screen modes than the
  95. standard ones (e.g. 132 columns) Vision Edit is capable of using those
  96. screen modes. However, before other screen modes can be used, you have to
  97. install them by following the procedure described below:
  98.  
  99. 1) - If you have one of the following graphic cards: 
  100.                    ERGO-VGA, SPEEDSTAR, or TRIDENT go to step 3. 
  101.    - If your VGA card manual lists all supported text modes
  102.                      go to step 2. 
  103.    - Otherwise, run TESTMODE.EXE (provided with Vision Edit) and write down 
  104.      all useful text modes from 0 to 255. For each mode which you want to use 
  105.      in Vision Edit write down:  mode number, 
  106.                                  number of lines, 
  107.                                  and number of columns 
  108.      later required by MAKEDRV.EXE program. TESTMODE.EXE displays all 
  109.      the necessary information (mode number and number of columns is already 
  110.      displayed), to count the number of lines use down arrow key and go to 
  111.      the bottom of the screen, the last number when cursor is still displayed
  112.      defines the number of lines).
  113.  
  114. 2) - Run MAKEDRV.EXE program (provided with Vision Edit) 
  115.    - Create a new driver for your card by selecting Driver|New menu function. 
  116.      (Enter the name of the new driver - MYDRIVER.DRV and press Enter )
  117.    - New entry dialog box is displayed. To navigate a cursor use "Tab" key
  118.      or a mouse.
  119.          - Enter a Name; press "Tab" key
  120.          - Enter a Version character; press "Tab" key
  121.          - now to add, edit or delete modes press "Ins", "Enter", or "Delete"
  122.            key respectively ( read status line )
  123.          - press "Ins" : dialog box for entering mode information
  124.            is dispalayed (enter  - the NAME for a mode press "Tab"
  125.                                  - the MODE number press "Tab"
  126.                                  - the number of COLUMNS press "Tab'
  127.                                  - the number of LINES press "Enter"
  128.            this procedure repeat so many times as the number of modes
  129.            identified in step 1 
  130.          - exit the program                              
  131.  
  132. 3) Copy a created (or selected) driver (*.DRV) to Vision Edit home directory
  133. and rename it to STANDARD.DRV.
  134.  
  135. 4) Start Vision Edit and select "Options" item from Menu Bar. Select 
  136. the Change Screen Mode item from pull-down menu you should be able to see 
  137. a dialog box containing all your screen modes.
  138.  
  139.  
  140. MACRO DEMOS:
  141. ============
  142. The following Macro-Demo files have been provided with Vision Edit:
  143. DEMO.MAC, DEMO1.MAC, DEMO2.MAC, DEMO3.MAC, DEMO4.MAC, DEMO5.MAC.
  144. In order to use any macro-file you have to add it to a list of macros using
  145. a function Read Macro from the Macro menu. After the file have been added
  146. to a macro-list you can run it by selecting it from the list (in Macro menu).
  147. DEMO6.MAC is not intended as a separate demo - it is called by DEMO5.
  148.  
  149. ENTERING ASCII CODES:
  150. =====================
  151. You can enter ASCII codes directly from the keyboard - hold down Alt key,
  152. enter ASCII code from the numeric keypad and release Alt key.
  153. ASCII codes can be entered both into active window and into Search/Replace
  154. dialog boxes.
  155. You can also send ASCII codes to the edit window from the Ascii Table.
  156. If you want to enter characters with ASCII codes < 32 into Search/Replace
  157. dialog boxes you have to press Ctrl-K and then Ctrl-A for #0, Ctrl-B for #1,
  158. etc.
  159.  
  160.  
  161. WHERE TO FIND THE LATEST VERSION OF VISION EDIT
  162. ===============================================
  163. When we release a new version of Vision Edit we send a Newsletter to all
  164. registered users. If you are not a registered user and you want to find the
  165. latest version of Vision Edit you can do one of the following:
  166. 1) Contact us directly at the following address:
  167.    Andrzej Brzezinski & Marek Kosznik
  168.    P.O. Box 2657
  169.    Winnipeg, Manitoba R3C 4B3
  170.    CANADA
  171. or e-mail address: umbrzez0@silver.cs.umanitoba.ca
  172.  
  173. 2) If you have access to Internet you can find Vision Edit at the following
  174.    Unix archives:
  175.  - wsmr-simtel20.army.mil (U.S.A.)
  176.    directory name - PD1:<MSDOS